2 retractable counter-terrorism cylinders system Came Ozak HBD/12, 900 mm high, diameter 270 mm, thickness 10 mm.
Feed:
Standard 400V AC triphasic 50/60 Hz, motor 1.1 - 11 kW (variation depending on the number of cylinders and accessories included).
Optional 24V DC in case of power out.
Control package:
Control unit PLC 24V DC set up in the cabinet.
Solenoids 24V DC (optional 12V DC / 230V AC).
Speed:
Standard operation ~ 2.5 - 6 sec. (rise/down) depending on the number of bills.
Rapid emergency lifting (EFO, by optional hydraulic accumulator) ~ 1 - 1.5 sec. It may vary depending on the number of the billings and the height of the lift.
IP protection class:
IP55 - Hydraulic power supply unit (optional electronic control plate with IP67 box)
IP68 - Hydraulic Piston.
Operating temperature:
-5°C / +55°C (optional -30°C / +70°C)
Classify impact/collision:
Tested on impact and certified according to ASTM F2656-07 at M50 level (K12).
In addition, it was designed and produced to withstand the impacts mentioned below:
| Standard |
Vehicle type |
Weight |
Speed |
| PAS 68 |
N3 |
7500 kg |
80 km/h (50 mph) |
| IWA 14-1 |
N3C |
7200 kg |
80 km/h (50 mph) |
Resistance per axis:
70 Tons.
Hydraulic cylinder:
Hydraulic cylinder with double effect, dusttight, designed for intensive use.
Hydraulic power unit and cabinet:
Reinforced industrial hydraulic pump,
Oil tank with capacity of 40 - 120 l (depending on the number of posts fed and the height of lifting), with magnetic metal collector and suction filter,
Indicator and integrated sensor for temperature, oil level and alarm for low oil level,
Standard pressure 60 - 120 bar (depending on the number of bollards, max. 160 bar),
Reinforced hydraulic hose type R2 10 meters (double-tracked),
Interconnected storms in case of installation several posts.
The motor, hydraulic pump and electrovalves are located in a galvanized steel cabinet and painted in the electrostatic field, easily accessible, with 2 caps incorporated with locks (optional, stainless steel cabinet).
System:
Entrances for descent, climb, stop, emergency and external sensors (e.g. metal mass detector, safety sensors, traffic lights, remote controls, etc.).
The system alerts with an audio signal during down and up operations. A strong siren triggers an alarm in case of alarm or emergency.
The system stops in case of urgency, according to the implicit configuration, and can be automatically lowered or lifted (at the user's preference).
It can be lowered and lifted manually in case of power failure or during maintenance with the manual pump and the manual valve.
The automatic lifting mode triggers the stem after the vehicle has passed over it (available with optional metal mass detector).
Contains IP67 magnetic sensor for barrier positioning and traffic signaling.
The independent piston connection structure, which does not place any load on the piston during the passage of the vehicle.
Equipped with absorbent bow system for blows to the top point.
The safety devices (if any) are activated if the quick lift function (EFO, optional) is enabled and can be optionally disabled.
Bollard (underground):
Posts anchorage housing:
Hot galvanized steel with a diameter of Ø338 mm, so designed that, after installation on the ground, it is not moved by any vehicle as a result of impact.
Entrance holes on the left and right for the hose and the hydraulic cable, for use in both directions, depending on the position of the hydraulic unit and the conditions of the location.
Includes a rainwater discharge record.
Easy installation with ground mounting plate by fixing with screws on the foundation. Easy access to the hose and hydraulic cables.
Main housing of the stem:
Hot galvanized steel structure with Ø324 mm diameter to ensure the main cylinder housing.
The stem cylinder rotates and moves through 5 rails placed on the main housing at equal distances for maximum rigidity and a minimum fraction of material.
Contains the inferior connection of the hydraulic cylinder.
Bollards (impact unit):
Cylinder (impact unit):
Hot galvanized steel pipe with diameter of Ø270 mm, thickness of 8 mm, containing special solid steel reinforcement bars, in the shape of a star, and solid steel reinforcement panels filled with composite for maximum impact resistance.
The impact unit shall be encased in a 304 stainless steel detachable manson (optional 316) with a diameter of Ø275 mm.
The impact absorption structure of 65-90 mm thick, eccentrically positioned, is made of solid 10 mm thick steel panels, in the special shape of star and filled with composite, to absorb the impact by distributing uniformly throughout the body.
Aluminium removable top cover, painted in the RAL 9006 electrostatic field, with intermittent red LED indicators, visible at 360°. Equipped with red reflective strips (optional white or yellow).
The cylinder of the stem rotates and moves through 5 special rails, non-replaceable, positioned at a distance equal to one another for maximum rigidity and minimum material fraction.
Contains the superior connection of the hydraulic cylinder.
Thanks to the anchoring housing of the stem, the cylinder of the stem is designed to be replaced with the main housing in case of damage due to an impact.
Surface plate:
15 mm steel, hot galvanized and painted in the electrostatic field in RAL 9006 color (optional other colors). Easy removal by connection type surub.
Contains both anti-powder sealing lining / waste-making lining.
Control system:
3 buttons for lifting, lowering and stopping operations and 1 button for stopping the emergency are contained in a box suitable for outdoor use (optional, 1 button for quick lifting EFO).
Contains built-in LED indicators and 10 meter cable.
The system stops the movement at the control of the safety sensor (optional) and the metal mass detector (optional).
The system works standard with PLC.
The state of safety sensors (if any) and metal mass detectors (if any), the position and movement of the stem and low oil level indicator can be monitored with an optional PLC control unit with diagnostic display.
Compatible with any access control system (part three).
Situation up to current:
The Bollards remains in its position in case of interruption of the food.
Optionally, it can be lowered or raised / lowered by a battery pack with 24V DC motor.
The battery pack offers me. 60 - 100 moves when fully loaded (minimum number of moves varies depending on the number of posts).