Boomx model BXB-E10DZ04-gy-L is an automatic barrier with 3.8 - 6 meters arm has the possibility to display led with 4 digits, for easy programming, and cycle of use is 85%.
Auto access barrier body with precision servo motor, speed 3-5 seconds, SERVO 85 series, for moderate, grey, left traffic
• Opening time: 3-5 seconds (adjustable)
• Arm dimensions: max length 6m, width 10cm, thickness 4.6cm
• Type arm: Right arm or fence
• Bi-directional design, arm position can be adjusted (right/right)
• Use cycle 85% (moderate traffic, maximum 125 openings per hour)
• MTBF: ≥4,000,000 opening/closing cycles
• LED display with 4 digits, for easy programming
• LED indicator on the body of the barrier (red/green light)
• High precision servo motor with aluminium housing
• Optical rotary encoder, the engine can adjust the position of the arm automatically, slowing down at the end of the race
• Equilibration with bows (1 or 2 bows, including depending on the length of the arm)
• Open-Close control interface, for integration with other equipment (NO dry contact)
• Obstacle detection photocell input (photocells not included, NO or NC dry contact, adjustable)
• Inductive loop detector input (the loop inducer is not included, NO or NC dry contact, adjustable)
• Monitoring arm position on vertical and horizontal, NO/NC
• Connecting signalling lights (semafor or lamp)
• RS485 communication interface (synchronization barriers on RS485)
• Emergency opening by simply lifting the arm or handle when the power supply is stopped
• Temporized self-closing (adjustable 3~60 seconds)
• Electronic adjustment position arm at race ends
• Automatic return to the encounter of an obstacle
• Function of the car column and alarm at unauthorized arm lift
• Possibility of integrating LED lighting arm (optional)
• 433 MHz radio receiver with two remote controls included
• Protection against weather IP54
• Feed: 220Vca ±10%, 110Vca ±10% (adjustable)
• Common: 50/60Hz
• Motor working voltage: 310Vcc
• Motor consumption: max. 150W
• Remote control actuator distance: ≤ 30m
• Remote memory controls: 46 holes.
• Material: Steel painted in electrostatic field, fine finishing
• Color variants: RAL 9007 + RAL 9006
• Body dimensions: 330(L) x 290(l) x 930(H) mm
• Motor operating temperature: -35°C ~ +80°C