
Choosing an automation for swing gates
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
If you have a swing kitchens with one wing or two wings and you want to install an automation system for them, you need to know a few things and features that you need to take into account.
Length of the wing (sheets or canadillos) of the neck.
For example, if you have a 2 meter long two-wing swing gate, you'll be looking for an automatic swing gate kit with calibrated motors for 2 meters or higher. We recommend that you take bigger motors, especially if the gates are covered with polycarbonate, board or wood. Placing them in this way, they will be porters and when the wind strikes, the motors will not be able to open or close the doors, there being the risk of their burning or ready to remain open.
Weight of a wing (sheet or leaf) of a gate.
The power of the engine shall be calibrated by the weight of the wing of the gate on which it will be mounted. It is well taken into account a reserve of force of at least 20% higher to avoid scorching the engine.
Size of the gate frame.
Depending on the width of the stem, where the swings of the gate wing are mounted, the motors that can be mounted are linear, articulated or buried. For small posts, when from the middle of the swing to the inner side of the doorpost is not more than 120 mm, it can mount linear motors. ( There are also certain linear motors that can be mounted if this distance is 150 mm ). For thick posts mount motors with articulated arm. When there is not enough space, there are very wide stumps or you want not to see the motors, they will mount buried motors.
Cycle of work. Depending on how many stockholders we need to use every hour or day, we'll look for motors with the greatest working cycle. The recommendation would be to be as big as possible to avoid heating and burning the motors.















