
Choosing an automation for the garage door
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
If you have a garage use and you want to install an automation system for it, you need to know a few things and features that you need to take into account:
Why do we have to keep in mind!
When we want to buy an automation for the garage door we have to take into account:
- Surface of the garage door;
- Weight of the garage door;
- The height of the garage door.
What kind of motor do I use?
- central motors with chain or belt (most used);
- axial motors;
- motors mounted on the door.
The surface of the garage door.
As a rule the engines for garage door automation are designed and made by the manufacturer for a certain height and weight of the garage door.
Great attention to the surface of the garage door. Find the surface of the door (air) by multiplying the height with the width. Choose an motor with at least 20% higher. Don't use an undersized motor.
The height of the garage door.
For centrally mounted engines, those with rail (with chain or belt), the height of the door matters because the length of the self is fixed or can/can not be extended with a certain length of rail.
You must consult the technical file or ask a specialist.
The weight of the garage door.
This weight is normally inscribed on the label that accompanies and is glued to the garage door.
If there is a sectional garage door in insulated panels with a thickness of about 40 mm an average weight per square metre would be about 12 kg/m.p.
Cycle of work.
Depending on how many stockholders we need to use every hour or day, we'll look for motors with the greatest working cycle. The recommendation would be to be as high as possible to avoid heating and burning the engine.















