
Wheelchair access to turnstiles: how do you choose swing
A wheelchair access in a turnstiles area means a wide, easy-to-use and access control tape. The Came Ozak and Atlas gates solve this passage for users in the wheelchair, parents with carriages and VIP visitors, without improvised side doors.
In short: choose a wide gate, sit next to the turnstiles, check the direction of the flow and ensure fast control from the reception.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A well-thought-out passage serves daily people in a wheelchair, parents with carriages and guests with luggage. The Came Ozak and Atlas gates integrate with the tripod towers and retain control over the same line. However, the final draft takes into account the building plan and the requirements of the authorities. For flow orientation, add and stainless steel balustrades. See models for a wheelchair access in the category Reduced mobility access.
A wheelchair access in a turnstiles area requires more than a wide band. In fact, the passage must work naturally for the user, for the guard and for the rest of the flow. In this guide we see how you combine the baton gates with the tripod towers. Then we go through the real models of the ONSEC offer.
Why it matters a wheelchair access to the entrance
Tripod and vertical turnstiles stop unauthorized crossings well. However, their rotating arms block a wheelchair or a cart. Therefore, any control point with mixed flow requires a separate, wider band. This tape provides access to the wheelchair, but also serves VIP visitors or equipment staff.
In addition, a well-planned transition reduces the crowd to peak hours. Thus, no one expects the guard to manually open a service door. At the same time, the person with reduced mobility enters the same route as everyone else.
What models do you find in the reduced mobility category?
Category Reduced mobility access gather swing gates for side passes. The present producers are Came Ozak and Atlas. Each model provides access to the wheelchair through a wing that rotates and fully releases the passage.
- Model Ozak VP 125 has a classic, entry-level design, with wheeled and wheeled seat wing.
- It would be Atlas OWL VIP 203 combines the stainless steel body with anodised aluminium arms and plexiglas.
- The VIP 203A version retains the same material, but comes with an angle cap.
- Range Came Ozak 605 S it is noticed by the distinctive shape of the body.
- There are two bands together Came Ozak 605 D and model 705 E N1 D.
Therefore, the choice depends on the style of the building, the environment and the number of bands. The OWL series also operates both indoors and outdoors, according to the manufacturer.
How to integrate a wheelchair access next to tripod turnstiles
Came Ozak Models 705 E N1 and 605 S function as standing rail gates. You can also use them as complementary units near Tripod tourniches. Thus, the control line remains unitary and provides access to the wheelchair without a separate door.
First, set where the sideband stands: at the end of the line or in the middle. Then check the direction of the flow. Model 705 E N1 and 605 S have two-way operation, i.e. entry and exit via the same passage. Instead, at two large flows, a double gate such as 605 D offers two strips of one body.
Port control: card, button or guard
The motorised doors in the range open at the control of the access control system. For example, the card reader can give the opening impulse, just like a tripod. However, it deserves a button at reception for visitors without a card. Therefore, a wheelchair access works well only when security can unlock it quickly.
Dimensions and space before mounting
The width of the passage differs from one model to another, so it reads the technical file of each product. In addition, measure the free space in front and behind the wing. The wing of the battleship needs space for rotation, no obstacles. On the other hand, the ramp and the threshold matter as much as the gates.
- Measure the real free width, not just the distance between the pillars.
- Check the flooring, which must remain flat and stable.
- Note where the power and control cables pass.
- Think of the waiting area, so the seat doesn't block the flow.
In other words, a well-sized wheelchair access starts from the building plan. The final solution shall be established after the project, risk analysis and the requirements of the authorities. The accessibility provisions are found in the documents published on National legislative portal.
Materials for a wheelchair pass, indoor or outdoor
Atlas OWL series uses stainless steel for body and anodized aluminium for arms. It therefore fits into office halls and outside entrances. Instead, the plexiglass on the wing provides visibility through the gates. Thus, the user sees the front area, and the security guard sees the user. The flat or angled cover holds especially the aesthetics of the building.
Also think about maintenance. A wheelchair access used daily collects dust, water and wheel tracks. Especially on the outside, choose easy-to-clean finishes. Then periodically check the swings and mechanism.
Daily flow: visitors, VIPs and deliveries
The wide band doesn't just serve people in the wheelchair. For example, parents with carriages use it as often. At the same time, the couriers with large vests avoid the arms of the tripod. Came Ozak's descriptions explicitly mention VIP tickets, wheelchairs and carriages. So, one gate solves several situations at reception.
Frequent mistakes at a pass for a wheelchair
- The wide band reaches the end of the hall, far from reception.
- No one can open doors when the reader does not recognize the visitor.
- The outer ramp has too large a slope, although the gate has the correct width.
- Signaling is missing, and the user does not know where to enter.
Therefore, a successful wheelchair access means gates, track and procedure. At the same time guide rail direct the flow to the correct band.
Frequently Asked Questions about Access to a Rolling Chair
Can I just use swing gates, no tripod twists?
Yeah. The Came Ozak 705 E N1 and 605 S models also function as standing rail gates. However, at high flows, the combination with the tripod remains more efficient.
What do I choose for two passing strips?
Dual variants, such as Came Ozak 605 D or 705 E N1 D, offer two single-body bands. Thus, you get a pass to the wheelchair on each direction.
Can the gates be mounted outside?
The Atlas OWL VIP 203 and VIP 203A series supports, according to the manufacturer, indoor and outdoor environments. For other models, check the technical file.
Who decides the minimum width of the passage?
The projector shall determine the width after the project and after the regulations in force. That's why a wheelchair access is still being discussed from the planning stage.
You want to compare the models? See all the swing gates in category Reduced mobility access. The ONSEC team helps you choose the right option for your entry.


















