Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Motor accessories rear-facing gate: how to choose the right gear rack

Sliding gate automation

Motor accessories rear-facing gate: how to choose the right gear rack

Among the rear-facing gear rack accessories, the gear rack has the main role: it transforms the rotation of the pinion into the movement of the gate. The material, section and mode of attachment shall match the weight of the portion and the intensity of use. A wrong choice uses the pinion and produces noise.

In short: the metal insert nylon goes to easy gates, galvanized steel to heavy gates and intense traffic; then check the catch and M4 module.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The right rack gear starts from the weight of the gate. For easy gates, the variants of nylon or teflon with metal insert work silently. For heavy gates or intense traffic, choose galvanized steel, with three-point grip and distance. Check the M4 module of the pinion and the total length of the portion, then command with a one metre reserve. All variants of FAAC, Quiko, GiBiDi, Motorline or Somfy are found in category of accessories for sliding automations.

Of all the rear-facing motor accessories, gear racks matter the most for daily operation. It is caught along the length of the gate, and the pinion of the motor is engaged in its teeth. However, not every rack gear goes to any gate. In this guide you compare the materials, the weights allowed and the ways of catching.

What role do motor accessories have sliding collars

A lifting kit brings the motor, the control unit and the remote controls. Usually, rack rack gear is missing from the package, because its length depends on the gate. Therefore, a separate order, at linear meter. It may also require additional distance or support. At the same time, some models include fixing supports, others do not. So, motor accessories sliding gate completes any real installation. You find them grouped in category of accessories for sliding automations.

Nylon with metal insert

The nylon works silently and does not rust. The metal insert gives it rigidity. For example, Gear rack FAAC 30x20x1000 mm comes with fixing supports. The manufacturer does not recommend it for gates over 400 kg. Instead, Quiko QK-CRN has a catch in 6 points and accepts gates up to 500 kg. In other words, for an easy residential gate, the rear-facing motor accessories of nylon are a comfortable choice.

Teflon rack rack for sliding

The metal insert Teflon offers an intermediate variant. Motorline CRM5 catch in 6 points and target residential use. The manufacturer recommends it for gates up to 5 meters and up to 500 kg. Then, GiBiDi AJ91111 uses plastic coated steel for gates of up to 600 kg. Thus, the teflon offers a quieter solution for slightly heavier gates among the motor accessories.

Steel galvanized: rack gear for heavy sliding

The heavy gates demand steel. For example, Motorline CRM4 has a section 30x12 mm, three-point grip and is intended for intensive use, for gates up to 2000 kg. Quiko QK-CRF3012 is mounted with screws and fits the gates of more than 500 kg. In addition, GiBiDi AJ91112/3 bring 4 meters of galvanized steel with 12 distances, for gates from 600 kg. Therefore, at industrial gates, sluggish motor accessories are still the natural choice.

There are also thinner variations.Gear rack galvanized FAAC 30x8x1000 mm, for example, has included supports, but the manufacturer does not recommend it over 400 kg. So, not just judge by the material, but also by the section. A thicker section takes better over the large loads and shocks at start.

How to choose after the weight of the serving

  • Up to 400 kg: nylon with a thin insert or steel, such as FAAC 30x8.
  • Up to 500–600 kg: Quiko QK-CRN nylon, Teflon Motorline CRM5 or GiBiDi AJ91111.
  • Over 600 kg: galvanized steel, such as GiBiDi AJ91112/3 or Quiko QK-CRF3012.
  • Intensive use: Motorline CRM4, up to 2000 kg.

The above limits for sliding gate motor accessories come from the manufacturer's descriptions. However, always compare them to the weight allowed by the motor. Thus, the rear-facing motor accessories and the motor work in the same range.

Rack gear for sliding collars: length required

The length of the rack follows the race of the gate, not just the void. First, it measures the total length of the sliding cane. Then add a reserve, because the segments merge and sometimes cut to the end. For example, most models are 1 meter long, and GiBiDi AJ91112/3 comes in 4 meters. Therefore, for a gate of 5 meters usually commands six segments by one meter. Thus, sliding motor accessories cover the entire race without gaps.

Noise, wear and maintenance

Nylon and teflon reduce noise in contact with pine. In contrast, galvanized steel is better resistant to heavy loads and intensive use. However, any rack gear collects dust and debris between the teeth. That's why periodically clean your teeth and check the game against the pinion. If the collars are left in time on the rollers, adjust the height of the rack again. In other words, the simple maintenance of these rear-facing motor accessories prolongs the life of the pinion and motor.

Sliding gate automation accessories: mode and grip

Almost all of the category racks have the M4 module. The module describes the size of the teeth and must correspond to the pinion. Catching also differs. Somfy offers rack gear with bottom grip and rack gear with top grip, 1 meter. Powertech PRK-1, in turn, has 30x10x1000 mm of galvanized steel. Therefore, check the motor manual before ordering the rearward-facing motor gearboxes.

Assembly and adjustment

The rack rack must stand parallel to the gate rail, at the full length. First you fix the first segment with the gate closed. Then push the manual claws and catch the next segments at a time. Thus, you keep the same distance from the pinion throughout the race. Between her teeth and pinion you leave a small game, so the weight of the gate doesn't hit the motor. Then check the couplings between the segments, so that the tooth pace remains constant. For technical requirements applicable to motorised doors, you may consult the national standardisation body, ASRO. Finally, the force adjustment remains the responsibility of the installer.

Frequently Asked Questions About Motor Accessories Sliding gate

How many rack racks do I order?

Measure the length of the gate and add a reserve. Most models are sold at linear meter.

Can I combine nylon and steel on the same gates?

We don't recommend it because the sections differ. Pick one guy for the length.

Where do I find other racks?

Full range you find in Gear racks category.

What motor do I choose for the gate?

See Kits for sliding gates, for different neck weights.

Conclusion

In conclusion, motor accessories sliding collars such as rack rack gear are chosen by weight, material, mode and grip. Compare variants in category of accessories for sliding automations or see all Section of automations sliding gates. The ONSEC team helps you choose if you tell it the weight and length of the gate.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).