Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Installation accessories automations: supports, batteries and poles

Automation accessories

Installation accessories automations: supports, batteries and poles

Automated mounting accessories such as supports, photocell poles, backup batteries or race limiters make the difference between an improvised installation and a clean one. They adapt automation to real land and keep it functional and out of the loop.

In short: automation mounting accessories means supports, poles, casings, batteries, memories and limiters, chosen according to the installed model.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The right assembly begins with the right parts of the ground. The supports and pillars bring the lamps and photocells to the right height, the metal casings protect them from blows, and the backup batteries keep the locks running at the current. Additional memories and magnetic limiters complete the installation inside. Note the exact pattern and check each compatibility. Choose assembly accessories automations from category Other accessories.

The automation kit covers the engine, central and a few remote controls. However, real land often requires extra parts. Here comes the assembly accessories automations: supports, poles, casings, batteries or modules. In this guide we group them into functions, with examples of the offer.

Why you need mounting accessories automations

Each gate has its own peculiarities. The pole may have a width too small for a photocell. The lamp has nowhere to stand on the wall. And the power goes down just when you need the collars. In all these cases, small pieces solve big problems. Therefore, it is worth planning the assembly accessories automations from the offer. Range of various accessories ONSEC gathers them in one place.

Installation accessories automations: lamp and photocell-cell supports

Flashing light must be seen in both directions. Sometimes the gate column doesn't offer room. For BFT RADIUS there is a wall support It's just like that. Quiko proposes the support in L QK-BRALUX for the QK-LUX24 and QK-LUX24LED lamps. In addition, it allows the radio module to be mounted inside.

The photocells need a correct height and a stable base. Roger H pillar 1000 mm It has a thickness of 27 mm and fits the R90 photocells. Also, Somfy offers a mounting kit for the narrow pillar. Thus, automation mounting accessories solve the lack of a suitable wall. Compatible photocells you find in category Safety photocells.

Mounting parts for automations exposed to vandalism

Photocells from the street are easily hit or torn. Beninca offers the carcass IRI.CELL for PUPILLA and PUPILLAF photocells. It has integral metal construction, hidden screws and a base that protects the contact area with the wall. At the same time, it allows the photocells to be adjusted to 180°. The manufacturer describes the assembly as fast and easy. So, choose anti-vandal automation mounting accessories where public access increases the risk.

Accessories for assembly of automations: spare power supply

A locked gate to the current signifies discomfort or even risk. That's why many automations accept backup batteries.

  • Nice battery B12-B, 12 V and 6 Ah, serves the RUN400HS and RUN1200HS automations, along with the PS524 charger.
  • The Nice CARICA plate connects the charger to the power plants that manage 24 Vdc motors; the recharge takes 24 hours.
  • The Ditec SBU kit includes the charging module for the NEOS, QIK7EH, ION and PWR series, but the accumulators do not enter the package.

Therefore, check the exact model of automation before ordering. For the PWR series, Ditec also indicates the BBU20 or BBU65 accumulator kit. At the same time, batteries have a limited life span, so they deserve to be checked periodically. Without a maintenance plan, neither the best assembly accessories automation does help.

Memory, modules and limiters

Some accessories work inside the power plant or engine. For example, Nice memory BM1000 add 255 transmitters for FLOX receivers. Thus, you extend the number of remote controls without a new receiver.

Quiko QK-ELOCKM supplies an electric lock, with output of 12 Vcc / 3 A and pulse of 0.2 seconds. The manufacturer indicates it for the controller Quiko QKCE220BATRL24. After installation, activate the function ‘electric locks' from the power plant menu. On the other hand, Came RSDN002 brings magnetic race limiters for sliding automations BK and BKV. In other words, and these parts enter the assembly accessories automation even if they are not seen.

Mounting parts for sliding automation

At the sliding gates, the rack rack must stand solid on the gate. Fadini offers the 208L attachment accessory set for this step. Further, Gear rack itself chooses it from the category Gear racks. However, the final alignment shall be based on the experience of the installer. And this set goes into mounting accessories automations useful for back doors.

Example: Modernising an existing gate

Let's take a sliding gate with automation for a few years. The owner wants safety at the power supply and better protected photocells. First, the installer checks if the plant accepts batteries. Then choose compatible accumulators and the right charging plate. Then move the photocells to their own pillars and put them in metal casings. Finally, add an additional memory for the new remote controls. So, well-chosen automation mounting accessories modernize the installation without changing the engine.

Recommended assembly order

  • First fix the supports and pillars.
  • Pull the cables through the protective tubes.
  • Mount the lamps, photocells and casings.
  • Connect the batteries and modules in the center.
  • Test each function before teaching.

Compliance reduces repeated interventions with mounting parts for automation. In addition, the final test immediately shows if a piece is missing.

Installation safety

The assembly of automations involves work with tension, height and heavy parts. Therefore, stop feeding before any intervention. Use protective equipment and suitable tools. General guides on health and safety at work find on EU-OSHA website. In addition, it shall comply with the instructions in the manual of each product. So, assembly accessories automations do their job without incident.

Quick list before ordering

  • Write down the exact brand and model of automation.
  • Measure the available pillars and walls.
  • Sets whether the area is at risk of vandalism.
  • Check to see if automating accepts backup batteries.
  • Count current and future remote controls.

Frequently Asked Questions about Automated Mounting Accessories

Does the backup battery match any motor?

Nope. Each battery or kit indicates compatible models, e.g. RUN400HS for Nice B12-B.

Can I increase the number of remote controls?

Yes, some assembly accessories automating extend memory. In FLOX receivers, BM1000 memory adds 255 transmitters.

What do I do if the pillar of the gate is too narrow?

Use a stand for your own photocells, such as Roger H 1000 mm, or the Somfy kit for the narrow pole.

Do I need the vandal casing?

It's worth it where the photocells are handy to passers-by. IRI.CELL protects the photocells Beninca PUPILLA.

See all products in category Other accessories and choose assembly accessories automations suitable for your model. The ONSEC team helps you check the compatibility of each piece.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).