Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Automation of exterior rollers: guide for oblonas, pergolas and controls

Shadow automations

Automation of exterior rollers: guide for oblonas, pergolas and controls

An external roller automation replaces the handle or manual lifting with a button-controlled or remote control motor. The ONSEC shade category gathers motors for shutters, pergola actuators, wall controls, adapters and accessories, especially from the Nice range.

In short: choose the engine after the weight of the shutter, then control, adapters and accessories, all compatible with each other and with the Nice family.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A motorised shadow system is built from compatible parts: motor according to weight, correct adapters, comfortable control and safety accessories. Nice Rondo, Euromatic Roll and Patio actuator cover oblonas and pergoles, and NiceWay plates simplify programming. Start from the shutter's data and then choose the rest, step by step. See all subcategories for external roller automation in Shadow automations.

An external roller automation turns a heavy shutter or a pergola into a remote controlled system. However, the result depends on the pieces chosen together: motor, adapters, controls and accessories. In this article we browse each subcategory of Shadow automations. So, you know exactly where you're looking for each component.

What includes an external roller automation

Any motorised system shall start from an operator who lifts and descends the oblonium. Then follow the mechanical adapters, which connect the ax or crown motor. Plus, you need a command mode, from wall button to remote control. In the end, the accessories complete the system, such as the brake or the temperature sensor.

So, a correct external roller automation doesn't just mean a powerful motor. In other words, each piece must match the others.

Map of shadow subcategories

The ONSEC shadow menu has several sections. Each covers a stage of an external roller automation, from motor to control.

Also, the menu includes the Cover Automations and Jalutical Automations sections, useful when the project expands. At the same time, you deserve to consult them before ordering.

Motors for shutters: automation heavy rolling shutters

The Nice Rondo range addresses balanced shutters, usually to commercial spaces. Models differ by lifting force and brake.

  • Rondo RN2010 lifts up to 130 kg, reversible and without brake.
  • Version RN2020 climbs to 180 kg, all reversible and without brake.
  • Model Nice Rondo RN2030 remains at 130 kg, but adds brake and release device.
  • Series ends with Nice Rondo RN2040, irreversible, with brake, for 180 kg.

Instead, Euromatic Roll targets balancing bows. Reversibility allows manual opening of the shutter and the engine accepts electromagnetic brake. Therefore, at an automation of external rolls of commercial type, weight and balance decide the model.

Reversible or irreversible?

A reversible motor allows manual movement of the shutter. Instead, one irreversible holds the oblation in position without help. However, the final decision shall take the type of shutter and the manufacturer's recommendation.

Pergola: Nice Patio linear actuator

For the blades of a pergola, Nice proposes the linear actuator Patio. The PATIO1515 model works at 24 V and develops 1500 N. Then the kit Nice Patiokit1515 add the control unit and temperature sensor. Thus, you get an extended exterior roller automation and on the terrace area, with parts from the same family.

Orders, wall plates and programming

The control subcategory contains the PATIOCONTROL unit and NiceWay accessories. For example, square Opla S and rectangular Opla R plates keep the transmitter on the wall. They come in black, transparent, dark grey or aluminum. In addition, the module Nice WM001G offers open-stop-close commands for an automation. At the same time, the Go support makes the transmitter portable.

So, an automation of the exterior rollers becomes comfortable when the command stays where you need it. Especially in spaces with several oblones, wall plates order commands.

Common adapters and accessories

Nice GIRO engines for balanced shutters use dedicated adapters. For example, Nice GRA02 Fits on the axis of 48 mm. Instead, GRA03 works with a 240 mm crown. Then, in the common accessories you find the electronic brake RNA01 for RN2020 and RN2010. Also here appears the additional engine GRA01 for GR170 and the PATIOSENSORT sensor.

When it deserves an external roller automation

Motoring makes sense especially in large and heavy shutters. For example, a store picks up the shutter every morning and takes it down at night. In this case, the handle consumes time and effort. Therefore, an external roll automation shortens the daily opening. Also, pergolas with blades gain comfort when the adjustment is made from the button. At the same time, centralized command helps buildings with many oblations. Thus, the staff no longer pass through each window.

Maintenance and safety at the engine of exterior rollers

A motorized system requires periodic checks, like any mechanism. First, it controls the balance arcs and the shutter's guides. Then check if the unlocking device works. In addition, clean wall plates and dust-exposed controls. However, interventions on the motor and the electrical installation remain in the care of a technician. So, a well-maintained external roller automation works longer.

Steps for successful external roller automation

  • It weighs or estimates the oblonium correctly and notes the type of balancing.
  • Choose the engine with margin to the weight and brake, if the situation requires it.
  • Check the axis or crown diameter for the adapter.
  • Decide order: button, wall plate or portable transmitter.
  • Leave the electrical installation to an authorized electrician.

For technical rules applicable to installations, you may consult the national standardisation body, ASRO. However, the final solution shall be determined after the design and the manufacturer's instructions.

Frequently Asked Questions about Automation Exterior Rollers

How do I choose between Rondo RN2010 and RN2040?

Starts from weight: 130 kg or 180 kg. Then decide whether you need a brake and irreversible operation.

Can I order the pergola and oblonium from the same place?

Yes, if you choose compatible orders from the Nice family. For example, NiceWay plates group transmitters on the wall.

What is the temperature sensor Patio used for?

The sensor works with the Patio control unit and provides information about the temperature of the pergola system.

Where do I find blankets and blinds?

The shadow menu has separate sections for them. Thus, you easily add them to an existing external roller automation.

You want to choose the right pieces? Starts in category Shadow automations and open each subcategory. The ONSEC team helps you combine the right engine, adapters and controls.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).