Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Magnetic loop detector: how to choose the barrier detector

Automatic barriers

Magnetic loop detector: how to choose the barrier detector

A magnetic loop detector senses the vehicle through the loop buried on the roadway and transmits a signal to the barrier or automatic gates. Thus, the access opens without remote control, and the arm does not descend over a car stopped below. The choice holds channels, feed and loop type.

In short: detector with one or two channels, 24 V or 230 V, pre-wired or cable loop and bituminous sealant.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The loop detection works discreetly, without sensors visible on the pillars. For a single band usually a channel arrives, and for entry and exit on the same band helps two channels. Matches the voltage with the core and the size of the loop with the width of the band. The Nice, Beninca or Came kits also include the seal mask. Sets sensitivity after actual tests with the usual vehicles of the site. Then choose a magnetic loop detector from the category Metal mass detectors.

A magnetic loop detector senses the presence of a vehicle above a cable loop buried on the roadway. When the machine arrives in the area, the metal mass modifies the induction of the loop, and the detector changes the condition of a relay. Thus, the barrier or gates receive an opening, holding or closing order. Next see how you choose the detector, loop and mounting accessories from the category Metal mass detectors.

How a magnetic loop detector works

The system has two parts. First, loop: a few wire spindles sitting in an asphalt or concrete cut. Then the detector: an electronic plate that feeds the loop and tracks the oscillation frequency. When a vehicle passes over, the frequency changes. Therefore, a magnetic loop detector reacts to the metal mass, not to light or motion.

Unlike the photocells, the loop is not dependent on alignment. Instead, it requires a cut on the roadway and a careful assembly.

What role does it play in automating the barrier

The loop may perform several functions, depending on the position and the programming of the power plant:

  • Automatic opening at exit from a parking lot, without remote control.
  • Keep the barrier open while the vehicle is under the arm.
  • Automatic shutdown after the car has passed completely.
  • Numbering of vehicles at entry, if the system permits.

Especially the safety function matters a lot. For example, a magnetic loop detector mounted under the barrier arm prevents a car from going down on the roof. However, the final safety solution shall be determined after analysis of each access.

One channel or two channels

A channel means a single loop connected. For example, GNV GVD301 has a channel, two relay exits and 7 sensitivity steps. On the other hand, two-channel detectors handle two loops with one plate. That's how they work BFT RME 2 or Faac FG2.

Two channels help the barriers where you want an opening loop and a safety loop. In addition, with two loops you can find out the direction of the vehicle. Loop Pro Detector offers even management of the walk direction and a boost function for sensitivity. Thus, a magnetic loop detector with two channels simplifies parking with entry and exit on the same tape.

Food and feed

The power supply shall correspond to the power plant or the table. The range covers both situations:

  • 24 V variants, such as BFT RME 1 BT or GNV GVD301, which accept 24 V AC/DC.
  • Models on 230 V, such as BFT RME 2, Loop Detector Pro or GNV PD-132.

Also check out. GNV PD-132 has two relays from 10 A to 230 V, and GVD301 has relays from 5 A. Later, connect each relay to the appropriate control plate entry. In other words, a magnetic loop detector does not directly control the engine, but sends a signal to the power plant.

Magnetic loop pre-wired or constructed on the yard

The classic loop is made on the spot, from the cable, after the size of the band. Instead, the pre-wired loops are ready to form. BFT Magnetic Loop 5MT It has, for example, 5 m of loop and 10 m of tail. The 8MT version has 8 m loop and the same 10 m tail. For smaller surfaces, BFT SPIRA has a size of 2x1 m.

At the same time, choose the size of the loop after the width of the band and after the type of vehicles. A magnetic loop detector works properly only if the loop covers the area where the machine stops.

Complete kits with metal detector masses

If you prefer everything in one package, the range includes kits with detector, inductive loop and bituminous mastic. Thus, you also receive the sealing material for the asphalt cutting. A few examples:

  • Nice LP21, with detector on a channel.
  • Benina VE.KM1H, still on a channel.
  • SMA Came, with detector, loop and mastic.

Especially at automations of the same brand, a dedicated kit simplifies the choice. In this case, a magnetic loop detector in the kit is usually integrated more easily with the manufacturer's central control.

Assemblage of the loop in asphalt or concrete

Installation of a metal detector masses requires little planning. First, mark the contour of the loop, away from large metal armor and other loops. Then cut a narrow ditch and clean it of dust. Then, place the coils, hold the tail turned to the detector and seal with a mask. Finally, adjust the sensitivity and test with a small car.

If you have close loops, use different frequencies. Therefore, Loop Detector Pro offers up to 4 frequencies on the channel. For general principles of safety at work equipment, you can consult EU-OSHA. At the same time, compare the loop with the rest of the equipment in Automatic barrier kits.

Sensitivity regulation

Sensitivity determines how easily a metal mass detector reacts. If you set it too low, small cars or those with high guard can pass unnoticed. On the other hand, too much sensitivity can trigger orders from vehicles on the nearby band. Therefore, it starts from an average step and adjusts after tests. GVD301 has 7 steps, and PD-132 has 4 steps, so the adjustment differs as finesse. A carefully adjusted mass metal detector avoids both false openings and failures.

Frequently Asked Questions about Magnetic Bucular Detector

Is he picking up motorcycles?

It depends on the metal mass and the sensitivity chosen. Therefore, test the adjustment with vehicles that actually use access.

Why do some detectors have more frequencies?

Close loops can influence each other. Thus, different frequencies avoid interference between them.

Can I replace the photocells with a magnetic loop?

Not completely. The loop only sees vehicles, not pedestrians. That's why a magnetic loop detector completes Safety photocells, without replacing them.

See all detectors, loops and kits in category Metal mass detectors. The ONSEC team helps you choose a magnetic loop detector compatible with your barrier or gate.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).