Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Flashing light led for gates: power and mounting

Automation accessories

Flashing light led for gates: power and mounting

A flashing light led for the gates warns pedestrians and drivers that automatic gates start. Category ONSEC includes Came, BFT, Beninca, Faac, Quiko and OEM universal models, 24 V, 230 V or wide power, some with built-in antenna and wall support.

In short: check the voltage of the power plant, the mounting place, the need for antenna and compatibility with the engine mark installed at the gates.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A well-chosen lamp makes the movement of the visible gate for all around, day and night. The voltage shall correspond to the output of the power plant and the support and antenna shall complete the assembly. Universal OEM models easily replace old lamps from known brands. For complete safety, combine signaling with photocells and, where necessary, with safety edges. Choose light led flashing for the category Flashing lights.

A light led flashing for the gates seems a detail, but announces every move of automation. The pedestrians see it before they hear the engine. Drivers also observe it from the street. In this guide we see how you choose the lamp after voltage, mounting and compatibility.

Why do you mount a light led flashing for the gate

Automatic gates move alone, sometimes ordered by someone else. Therefore, those nearby need a clear signal. The lamp blinks during the movement and draws attention. At the same time, the lion consumes little and resists much. Thus, a light led flashing for the collars completes the photocells without replacing them.

What voltage requires a flashing light for automation

The lamp shall correspond to the exit from the control station. Otherwise, it doesn't work or it can fail. Examples in the category cover all situations.

  • Came KLED24 works at 24 V and measures 130 x 170 x 76 mm.
  • Faac FAACLED uses 24 V.
  • BFT B LTA works directly at 230 V.
  • Beninca Lampy accepts a wide domain, from 12 to 255 VAC/DC.
  • Universal OEM models accept 12-24 V AC/DC or 85-230 VAC.

So, read the power plant manual before ordering a light led flashing for the gate. Especially in replacements, the old voltage may differ from that of the new lamp.

Intermittent lamp for doors, with or without antenna

Some lamps integrate the radio antenna. For example, Beninca Lampy It's got the antenna in it. So you're not mounting a separate antenna on the pole anymore. In contrast, other models require an external antenna, in the category Radio antennas. There you can find, for example, Life Skanx for Life Splendor lamps.

Quiko QK-LUX24LED: radio support and mode

Model Quiko QK-LUX24LED Mount on the pole or wall. For wall use the QK-BRALUX support, from Other accessories. In addition, the lamp accepts the plastic holder for the radio module QK-AN433-V4. Thus, this flashing light led for gates becomes and reception point.

Original or Universal OEM lamps

The original lamps shall retain the appearance and compatibility of the mark. For example, Came KLED24 accompany the Came automations for swing gates. Then, BFT B LTA serves installations that require 230 V.

On the other hand, OEM models replace Nice, Cardin, Sommer, Tau, Gibidi, Mhouse or Ecostar lamps. For example, Nice compatible OEM lamp Take the classic shape of the original lamp. However, check the voltage of the installation before mounting. In other words, a flashing light led for universal gates saves time at service. All these variants compare them in the category Flashing lights.

Where you mount a light led flashing for the gate

  • On the pole of the gate, at the height, to see it and pedestrians and drivers.
  • Near the car entrance, facing the street.
  • Away from the branches or bright firms that can hide it.
  • With the cable protected in the tube, especially on the outside.

Also think about the direction people come from. A lamp hidden behind the pole doesn't do its job. In addition, at the long sliding gates, put an intermittent light for the gates at the visible end of the street. Then check if the light reaches the pedestrian alley.

Signalling in industrial premises

At warehouses and halls, the automatic gates move next to stackers and pedestrians. Therefore, visual signaling matters even more. For example, in a storage yard, truck drivers see the lamp before they observe moving claws. At the same time, an intermittent lamp for the gates remains visible in the noise in the courtyard. General recommendations on safety at work found at European Agency for Safety and Health at Work. However, the final solution shall be determined after the risk analysis of the location. So a light LED flashing for the gate remains only part of the safety system.

How does the lamp work during the cycle

The control unit shall supply the lamp during the movement of the gate. For example, Came KLED24 transmits light signals while the gates move. In addition, many power plants offer a pre-warning function before starting. Therefore, people receive the signal a few minutes earlier. However, the exact functions depend on the model of the plant. So, a light LED flashing for the gates works together with the settings in the center, not separate.

Maintenance of the lamp

The LED has a long running life, but the housing is outside. Therefore, periodically verify that the disperser remains clean and whole. Then control the lining and the entry of the cable, so that the water does not penetrate. Also check the pole for strong wind. Thus, a flashing light led for the gate remains visible every season.

Frequent errors with an intermittent gate lamp

The first voltage error: a 24 V lamp connected to 230 V is destroyed. Then some mount the lamp too low, where the cars cover it. In addition, the antenna cable sometimes stays too long or bent. Finally, many forget that the lamp does not replace the photocells.

Frequently Asked Questions about Flashing Light LED for Gates

What tension do I choose?

Choose the voltage of the lamp output from your power station, usually 24 V or 230 V. Just then compare the light led flashing patterns for the gate.

Can I replace an old Nice lamp with an OEM?

Yeah. Nice compatible OEM model takes shape of the original. But check the voltage, like any flashing light led for the gate.

Do I need a separate antenna?

Depends on the model. Beninca Lampy has a built-in antenna, and other lamps are requesting an external antenna.

Can I mount the lamp on the wall?

Yeah. Quiko QK-LUX24LED is mounted on the wall with QK-BRALUX support. Thus, choose the place of a lamp after visibility, not just after the pillar.

You want to compare the models? See category Flashing lights and filter after the mark. The ONSEC team helps you choose a flashing light for automation compatible with your engine.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).