Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Industrial door automation chain: parts, mounting and adjustment

Door and industrial automation

Industrial door automation chain: parts, mounting and adjustment

A chain for industrial door automation transmits the movement from the motor to the door axle when the operator does not sit directly on the axle. It counts on large sectional doors, where the direct assembly does not fit or where you need a different ratio between speed and force to the tree.

In short: a Nice transmission has 1/2" chain, coupling element, 18 or 36 teeth crowns, extender, pinion shaft and ax adapter.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A transmission with the right chain mounted works quietly and starts the door without any smudges. So choose the right length, check the alignment of the crowns and adjust the extender before the first start. Then it includes in the maintenance plan the anointing and voltage control, as a chain for industrial door automation is elongated over time. All Nice pieces for the SUMO series, from chain to adapter, you find them in the category industrial door fittings from ONSEC.

A chain for industrial door automation seems a trivial piece, but it depends on the transmission of force from the motor to the axle. In the ONSEC store, the category of accessories includes Nice pieces for SUMO operators. Below we explain the role of each component and the order in which you choose them. Thus, avoid incomplete commands and stops during assembly.

When you need a chain for industrial door automation

First, check the engine position. Sometimes the operator is directly attached to the axis of the sectional door. At other times, the space above the door does not allow this. In this case, the engine sits sideways, and the chain connects to the axle. Therefore, a chain for industrial door automation solves the lack of space without changing the operator. The transmission also allows you to choose another speed-force ratio.

What contains a chain transmission for the industrial door

A complete transmission has several pieces. Everyone has a precise role, so missing one blocks the assembly.

  • The 1/2" chain transmits the movement between the two crowns.
  • The coupling element closes the chain to the desired length.
  • The crown on the ax takes over the force and rotates the door shaft.
  • The pinion on the motor trains the chain.
  • The extender maintains the correct voltage over time.
  • The wall bracket secures the whole to the structure of the hall.

So, a chain for industrial door automation only works together with these parts.

Industrial door automation chain: 1 m or 5 m

Nice offers the 1/2" chain in two packs. Version Nice CRA3 has 1 m and includes the coupling element. Instead, Nice CRA4 comes in package of 5 m, for industrial doors with one or two leaves. For example, at a high distance between motor and axle, the long package avoids multiple couplings. However, keep a few extra cups for adjustment. Thus, choose a chain for industrial door automation after the actual distance, not after estimates.

Separated, for a chain for industrial door automation shortened to length, Nice CRA2 coupling element is ordered individually. It's worth having a spare one, especially at the mountings in the halls far from service.

Crowns, pinion and transmission report

Crowns change the way the engine works. Nice proposal CRA7 crown with 18 teeth and the CRA6 crown with 36 teeth. Besides them, Pine tree Nice CRA1 has 18 teeth and a diameter of 25,4 mm. Therefore, you can combine the teeth for the desired report. As a general rule of mechanics, a large crown on the ax reduces speed and increases the couple to the tree. In other words, a chain for industrial door automation always works together with the chosen report.

However, check in Nice instructions the combinations accepted for your engine. A misreport can slow the door too much or oversoul the operator.

Door-axle adapter

The sectional doors have axes of different diameters. That's why, Nice CRA9 adapter covers a diameter of 31,75 mm (1 1/4"), 35 mm and 40 mm. Measure the axis before the control, because the wrong adapter does not mount. In addition, the Nice CRA8 wall mount secures the engine in the correct position to the chain. Thus, a chain for industrial door automation remains aligned and does not jump off the teeth.

Mounting and step-by-step adjustment

  • First measure the distance between the engine pinion and the crown on the axle.
  • Then align the crowns in the same plane, with a ruler or a wire.
  • Cut the chain to length and close it with the coupling element.
  • Mount the Nice CRA5 extender on the free side of the chain.
  • Adjust the voltage until the chain has only a small arrow.
  • Turn on the door with your hand, then your engine, and watch the noise.

Therefore, a well-extended industrial door automation chain is starting the door without any twists.

Frequent errors in mounting

Many problems arise from small details. That's why you deserve to know them from before.

  • The crowns mounted in different planes quickly use the chain.
  • Too much tension loads the camps and the engine.
  • A chain too weak salt on the teeth to start.
  • The adapter chosen after the eye doesn't fit on the axis.
  • The absence of a spare coupling element stops the work.

Therefore, a chain for industrial door automation requires a final check before surrender. All spare parts for these situations appear in the category industrial door fittings.

Maintenance of transmission and safety at work

A chain transmission requires regular attention. First, clean the dust and grease the chain according to the manufacturer's recommendations. Then check the voltage, because the chain runs a little over time. It also replaces worn-out teeth with the chain. At the same time, works on height and moving parts require protective measures. For general recommendations, consult European Agency for Safety and Health at Work. Finally, a properly maintained industrial door automation chain prolongs the operator's life.

Frequently Asked Questions about the SUMO Motor Chain

What's a SUMO motor chain got to do with Nice?

The Nice CRA3 and CRA4 chains take a step of 1/2". Therefore, use crowns compatible with this step.

How much Nice transmission chain do I need?

A chain for industrial door automation depends, as a length, on the distance between pinion and crown. Usually, the 1 m pack reaches compact mountings, and the 5 m pack at large distances.

Why do I need a stretcher?

The extender keeps the pressure constant. Thus, the chain does not jump off the teeth and does not make noise.

Does the CRA9 adaptor fit on any axis?

No, the adapter covers 31,75 mm, 35 mm and 40 mm. Therefore, measure the axis before ordering.

Complete the transmission

If you choose the engine, see automations for sectional doors or the whole range of Industrial automation. All Nice pieces are in the category industrial door fittings. The ONSEC team helps you choose a chain for industrial door automation suitable for your installation, with all the necessary parts.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).