
Barrier arm lights: how to choose the right LED set
Lights for the barrier arm make the blade visible at night, on rain or fog. The bands and LED sets, chosen according to the barrier model and the length of the arm, reduce the risk of a driver hitting the blade. In addition, the colour of the light clearly shows whether the barrier has risen or fallen.
In short: choose lights for the barrier arm by model (EVA, S-Park, QIK, GARD) and length (4, 5, 6 or 11 m), then check the wiring.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A lighted barrier arm reduces hits and makes the entry easier for drivers to read. Measure the blade, note the barrier pattern and choose a compatible set, from 4 meters to 11 meters. For some Came barriers, the red/green light crown and the LB38 plate complete the system. If you have doubts, compare the product files before ordering. Discover all light variants for the barrier arm in the category Electrical accessories.
Parking barriers often work in the dark, in the rain or fog. For this reason, lights for the barrier arm make the blade visible to drivers and pedestrians. In this guide we see which variants exist, how you choose them after lengths and what assembly details matter.
Why do you build lights for the barrier arm?
A barrier arm usually has a narrow section. At night, the driver sees him hard, especially if the headlights hit obliquely. Therefore, an LED tape along the blade clearly signals the obstacle. In addition, the colour of the light may indicate the state of the barrier.
- The lowered arm becomes visible from a distance.
- Drivers understand faster when they have to stop.
- The risk of hitting the blade drops, so the repair costs also fall.
- The entrance to the parking lot looks neat, even at night.
However, lights for the barrier arm do not replace photocells or magnetic loop. They complete the safety system, don't replace it.
What variants do you find in the category Electrical accessories
Range of Electrical accessories ONSEC includes solutions for several barrier manufacturers. First, there are LED tapes sold at fixed lengths. Then you find complete sets for certain barrier models. Finally, some accessories light the body of the barrier, not the blade.
LED strip for barrier arm and complete sets
- A LED tape for the S-Park barrier arm comes in 4 metre version and in the 6 metre version.
- The EVA barrier set is 5 metres long.
- For long arms there is Set Beninca EVA.L8 of 11 meters.
- Kit BFT KIT LIGHT It covers arms of 3–4,5 meters.
- Ditec proposes the 4-metre QIK LUX set, and Came offers 803XA-0020 red/green band for arms up to 4 metres.
Light crowns on the body of the barrier
Came also offers bright crowns with red/green LED. Model 803XA-0280 matches the GARD GT4 barrier, and 803 XA-0430 the Gard GT8 body. So the driver sees the condition of the barrier just before he reaches his arm. On the other hand, the crown does not illuminate the blade, so it also remains useful for the arm of the barrier.
How to choose lights for the arm of the barrier after length
The first criterion remains the length of the blade. A short set leaves the end of the arm in the dark. Instead, a long set doesn't fit the profile. Therefore, measure the arm before ordering and compare it to the length of the product file.
- For 3–4,5 meters arms, a light kit for a short barrier arm, such as BFT KIT LIGHT, fits.
- Between 4 and 6 meters, choose a band of 4 or 6 meters, by profile.
- Over 6 meters, look for long sets, i.e. 11 meters variants.
The second criterion is compatibility. Many sets are ready the name of the barrier model, such as EVA, S-Park or QIK. So, a set chosen by the model gets right in the blade profile. If you don't know the exact pattern, check the label on the barrier body.
Wiring and connecting to the power plant
Any set of lights for the barrier arm needs power that follows the blade's movement. That's why Came offers cable connection kit 803XA-0190. It makes the connection between the LED tape and the barrier body. At the same time, the cable must allow the arm to rotate without mechanical tension.
Before mounting, read the control station manual. Some plates have their own exit for lights, others require a separate relay. In addition, a wrong connection can block the operation of LEDs. So an electrician with experience in automation quickly solves these details.
A case frequently appears in modernization. You have a functional barrier, but no signal on the blade. In this case, the light for the barrier arm shall be added subsequently without changing the engine.
What's going on up to date
The lighting of the arm also matters when the network falls. Came proposes plate LB38, for blackout operation and battery charging. The manufacturer shall indicate it for models such as GARD G4000, G6000 or G12000K. Thus, the barrier can continue the cycles on the battery. However, autonomy depends on batteries and the number of manoeuvres.
In short, lights for the barrier arm and spare power work together. One ensures visibility, the other continuity.
Errors to avoid when mounting
- Choice of length "with eyes, without measurements.
- Mounting a light kit for the barrier arm designed for another profile.
- Wire drawn without a twisting loop at the joint.
- Lack of verification after the first days of operation.
- Ignoring cleaning, because dust and mud decrease the intensity of light.
Also think about the wind and the blows. An arm hit often loses its LED strip quickly. Therefore, at crowded entrances it is also worth the protection parts of the category mechanical accessories.
For public road entrances, the signalling rules shall be governed by road legislation. You can consult the regulatory acts on National legislative portal. There, the final solution shall be determined after the project and the requirements of the authorities. However, in private parking lots, lights for the barrier arm remain a simple measure of prevention.
Lights for the barrier arm and the rest of the system
The blade lighting works best alongside other signals. For example, an intermittent lamp on the body of the barrier warns the movement. Find such models in the category signalling lamps. In addition, if you start from scratch, a complete kit simplifies the choice. Later, complete with lights for the arm of the barrier suitable for the model.
Frequently Asked Questions about Lights for the Barrier Arm
Can I mount the lights on an old barrier?
Yes, in many cases. Check the barrier pattern and the length of the blade. Then choose a compatible set or a suitable length band.
What color is the light?
Depends on the product. Came Band 803XA-0020 and crowns 803XA-0280 or 803XA-0430 use LED Red/green. So the color can show the state of the barrier.
Does the exact length of the band matter?
Yeah, it matters. Too short a band leaves the end of the arm without light. Therefore, before ordering lights for the barrier arm, measure the blade and compare it to the values of 4, 5, 6 or 11 meters of the offer.
Are the lights going up?
Only if the barrier has backup power. For some Came models, the LB38 plate allows battery operation.
See the full range of Electrical accessories for barriers and choose lights for the arm of the barrier by model and length. The ONSEC team helps you choose if you need a compatibility confirmation.



















