
GSM module for doors: how to open access with your phone
A GSM module for gate turns your mobile phone into remote control: you call the SIM card number, and automation gets the opening command. The solution helps where many people need access without sharing dozens of remote controls. Some models also keep the history of entry.
In short: the module receives a call or command from the application, recognizes the number and closes a relay linked to the control plate of the gate.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
Phone command simplifies access management: add or delete a number in seconds and no longer look for remote lost controls. Before installation, check the network signal, power supply and control input of the power plant. Keep the photocells active because the gate starts and when you don't see it. Choose a GSM module for the caterpillars after the number of users and the desired functions. Compare models in category GSM controllers.
A GSM-for-Gate mode allows you to open the automation with a simple call from your mobile phone. Virtually, the SIM card in the mode receives the call, and the device searches for the number in the user list. If the number appears there, the relay sends the command to the gate plate. In this guide you will find how the system works, what models you find on ONSEC and what you check before mounting.
What does a GSM module for the gateways
First, he deserves clarification of his role. The device does not replace the engine or the control plate. Instead, add a new control path along with remote controls, selectors or buttons. Thus, the gate answers the call just as it answers a remote control button.
Specifically, the module has a relay exit, that is, a contact that closes for a short time. The contact shall be linked to the step-by-step entry or to the plant opening entry. Therefore, a GSM module for gates is integrated into most automations without major changes. However, read the plate scheme before connecting.
How the command works by calling
Steps remain the same at each access:
- The user calls the SIM card number in the mode.
- The device compares the caller's number to the saved list.
- Usually, the call is rejected, so the call doesn't really start.
- The relay closes, and the gate starts the opening cycle.
Also, unknown numbers don't get access. Therefore, the control remains with the administrator, who adds or deletes users when needed. Configuration is usually done by SMS, with commands sent from the administrator's phone. In other words, a GSM module for the gate changes the management of access on the phone.
Two models with different approaches
On ONSEC, in category GSM controllers, You find two variants with slightly different philosophies. First, GSM RTU5025 module, works in 2G, 3G and 4G networks. It can memorize up to 999 phone numbers. Therefore, it fits blocks, residential assemblies or parking lots with many users. As GSM mode, RTU5025 focuses on simplicity: call and open.
The second model, GSM controller and Bluetooth Motorline M200, add an Android application. Thus, users nearby command Bluetooth gated, and those located far away can call. In addition, M200 displays notifications and activity history. The manufacturer recommends it for residential areas and business centres.
Where a GSM module fits
The solution brings the most where the number of users increases or changes frequently. For example, a common range of gated dwellings avoids the distribution and cloning of remote controls. On the other hand, a company with shift workers gives temporary access to a collaborator, then deletes it from the list. For an administrator, a GSM module means less time lost with remote controls.
- Sliding gates or swing gates to blocks and residential assemblies.
- Parking barriers for employees or tenants.
- Garage doors to houses with several family members.
- Service access rarely used, where a remote control would easily lose.
However, a GSM module for the gates depends on the signal of the mobile network instead of the mounting. Therefore, check the cover before choosing the position of the box.
What to check before mounting
A successful installation starts with a few simple checks. First, test the signal with a regular phone right next to the automation chart. Then find out what power supply voltage the module accepts and whether the port plate can provide it. In addition, identify the appropriate control input on the power plant. For general principles of safe working with moving equipment, consult and European Agency for Safety and Health at Work.
- SIM card: Choose an active long-term card.
- Antenna: a metal casing weakens the signal, so remove the antenna out.
- List of users: Prepare the numbers for GSM mode before setting up.
- Safety: Keep the photocells active, even if the gates start from a distance.
Especially at the gates you don't see when you call, the photocells and flashing light become essential. A GSM module for the gate opens anywhere, so the moving area needs the same protection as at the local command.
GSM module, remote control or radio receiver?
Every method of command has its place. The remote remains the fastest at the car entrance. In contrast, a GSM module for gate does not require physical objects and is administered centrally. External radio receivers, such as Retel receiver RT01, add new remote controls to an existing automation.
You can also combine solutions. Locals use, for example, remote controls, and visitors get access by call. For more advanced integration, interfaces such as Nice OBOX2B with Bluetooth mode link automation to dedicated software. More variants in the category Other interfaces and in Radio receivers. So the choice depends on how many people come in and how much control you want on the list.
Frequently asked questions: GSM module for gates
Is there a GSM without the Internet?
Yeah. The call command uses the voice network, so you don't need mobile data. However, the card must remain active.
How many users can access it?
Depends on the model. RTU5025 stores up to 999 numbers, so it covers a large number of homes.
Can I use the solution to a barrier or a door garage?
In general, yes, if automation has a dry contact control input. Thus, a GSM module for gates works as well on barriers or garage doors.
What's going on at a power outage?
Without power, the module and the mouths stop. Therefore, at a GSM module for the collars also counts the spare source, not just the engine battery.
If you want to compare options, enter the category GSM controllers and read the technical details of each model. The ONSEC team helps you choose a GSM module for your gate according to your automation and the number of users.



















