Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Rolling shutter motor: reversible or irreversible, with or without brake

Shadow automations

Rolling shutter motor: reversible or irreversible, with or without brake

A rolling shutter motor lifts and descends the balanced oblonium of a shop, garage or window without manual effort. The correct choice is due to the weight of the shutter, the brake and the release system. The small differences between models greatly change the safety and comfort of everyday life.

In short: check the weight of the shutter and the arcs, choose 130 or 180 kg, then decide between reversible and irreversible motor, with or without brake.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A well-balanced oblonium and an elected margin motor work quietly for many years. The brake and manual release count as much as the lifting force, especially at the daily used inputs. If the shutter protects a window, it's worth choosing an irreversible model or one with a brake. For remote control, add a compatible control unit and remote controls. See Nice Rondo and Euromatic models from Oblonous automations and choose the right option.

A rolling shutter motor turns a tiring operation into a simple push-button. However, not every motor matches any shutter. It matters the weight, the balance with the bows and the way the motor keeps the oblonium in place. Below we explain these differences on the actual models of the offer.

What makes an shutter motor central rolling

Models in this category work on balanced oblons, i.e. those with bows on the axis. The bows take most of the weight. The engine shall be mounted centrally, on the axis of the shutter, and shall complete the force required. Therefore, at an shutter-rolling motor it matters a lot about the condition of the arcs.

All models here work at 230 V. Thus, you feed them directly from the network through the control station. Manufacturers also think of them for compact mounting, in the box or under the ceiling.

Lifting force: 130 kg or 180 kg

The Nice Rondo range has two stages of force. Versions RN2010 and RN2030 shall be up to 130 kg. Instead, RN2020 and RN2040 rise to 180 kg. When you choose an shutter motor, you start from the actual weight of the shutter.

  • Aluminium blades weigh less than those of steel.
  • The high height means more blades on the axis.
  • The old bows lose tension and increase the load on the motor.

Therefore, choose a step with reasonable margin compared to the measured weight. A limit motor is heated and used faster.

Reversible or irreversible motor

Here is the most important difference between models. A reversible motor allows the movement of the shutter and hand when the motor is sitting. For example, Nice Rondo RN2010 work reversible, without brake, up to 130 kg. Stronger option, Nice Rondo RN2020, keep the same principle at 180 kg.

Instead, an irreversibly rolling shutter motor blocks the shutter in the position where it stops. Model Nice Rondo RN2040 work irreversibly, with brake and release device. Therefore, no one can lift the oblivion with the force from the outside.

Brake at an shutter-rolling engine

The brake shall keep the oblation in place in any intermediate position. Especially at heavy shutters, the brake prevents uncontrolled descent. Model Nice Rondo RN2030 combines reversible operation with brake and release at 130 kg. Thus, you get both advantages in one product.

The Euromatic Roll range follows another logic. The engine has perfect reversibility, i.e. the shutter can be opened manually. At the same time, it accepts the installation of an electromagnetic brake that makes it irreversible if the situation requires it. See details at Euromatic Roll.

Manual release to a rolling shutter motor

Without current, the ob still has to be able to open. The unlocking device decouples the ax motor. Then raise the oblivion with your hand, supported by the bows. That's why an shutter motor with unlocking runs into spaces with only one input.

Think about access to the unlocking handle. If the shutter closes the only door to the store, you need an outside solution. In this case, discuss the version with the installer before mounting.

How to choose an shutter motor running, in short

To simplify the choice of an shutter motor, we have grouped the most common situations:

  • House garage, light shutter: a reversible 130 kg model, such as RN2010.
  • Store window: an irreversible or braked model for safety.
  • High steel shutter: 180 kg step, with margin compared to weight.
  • Shutter often used: a model with brake, such as RN2030 or RN2040.

On the other hand, at the hall gates or at the very heavy shutters, the Rondo range does not reach. For these, see automation of industrial shutters, with Nice Giro motors of 170 kg or doubled to 340 kg.

Control and safety at a rolling shutter engine

An shutter motor running does not decide alone when the shutter starts. You need a unified control, button or radio receiver for remote controls. Find compatible variants in control stations. Also check which functions offer the central, such as stopping at the obstacle.

An shutter who goes down can hit a person or an object. Therefore, we recommend order with maintenance or safety accessories where people pass. Requirements for motorized doors and shutters appear in European standards taken from ASRO. However, the final configuration is set by the installer after each location.

Maintenance at an shutter rolling automation

A rolling shutter motor requires little attention, but the shutter around it needs regular checks. First, watch if the blades slip freely into the guides. Then listen to the new noises at start or stop. A metallic sound often indicates a twisted guide or a deformed blade.

  • Clean the dust and leaf guides once a season.
  • Check the arc voltage with a specialist at regular intervals.
  • Test the manual release, so you know it works as needed.

In other words, a rolling shutter motor lasts longer when the shutter remains well balanced. If the arcs weaken, the motor takes over the load and heats up. Spare parts and models you find in category of oblation automations.

Frequently Asked Questions about Motor Shutter Rolling

Can I mount an motor on an existing manual shutter?

Yes, if the oblonium has balancing bows in good condition. Otherwise, the installer adjusts or replaces the arcs first.

What does "irreversible" mean in a rolling shutter engine?

It means that the engine blocks the shutter when it stops. Thus, the oblonium cannot be forced up from the outside.

Do I need a brake if the engine is reversible?

To heavy or used oblations often, the brake adds safety. For example, RN2030 offers brake and release to a reversible motor.

Are these motors going 24 V?

No, the models in this category work at 230 V.

An shutter motor that is correctly chosen works discreetly and safely years in a row. Compare models from Oblonous automations, And the ONSEC team helps you choose the right option for your shutter.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).