Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Industrial balanced shutter motor: 170 kg or 340 kg

Door and industrial automation

Industrial balanced shutter motor: 170 kg or 340 kg

A balanced shutter motor lifts large shutters from halls, warehouses or commercial spaces, where manual operation quickly wears out. The oblivion uses bows that take over the weight, and the motor adds the required force. The correct choice is due to the total weight, the brake and the way the oblonium opens to a power failure.

In short: the Nice Giro range is up to 170 kg with one motor and 340 kg in double version, with or without braking mechanism, at 230 V.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

At industrial shutters, lifting force, brake and manual unlocking matter as much. An motor chosen with margin compared to the real weight works quietly, even at dense openings. The double version solves the very heavy shutters without changing the mounting principle. The correct balance of the arcs prolongs the life of the entire system. Compare Nice Giro models from Shutters automation and choose the right configuration for your coat.

Hale shutters have large widths and heavy blades. Therefore, a balanced shutter motor becomes almost mandatory for daily use. However, force is not the only criterion. Below we analyze the range of Nice Giro and the differences between its variants.

Why does the industrial oblivion need bows

The balanced shutter has bows on the axis, which compensates for the weight of the blades. Thus, the motor does not lift the whole table, but only the remaining difference. Therefore, a balanced shutter motor works correctly only if the arcs have the right voltage. A weak arc transfers the load on the motor and shortens its life span.

Especially at the old shutters, check the arcs before automation. The installer adjusts the voltage or replaces the tired arches. Then he can choose the really right engine.

Range Nice Giro: 170 kg balanced shutter motor

All Giro models in this category are irreversible electromechanical motors at 230 V. Only one motor lifts up to 170 kg. In addition, you can add an optional motor to reach 340 kg. So the range covers both the medium and the very heavy.

The differences between the variants therefore have to do with braking and unlocking. Check the form of each model before ordering, as the codes are much like each other.

Brake-balanced or non-brake-balanced shutter motor

The Giro engines remain irreversible, which means they keep the shutter on when they stop. However, the brake adds an additional level of safety. It stops the oblation and keeps it in intermediate positions. That's why we recommend a balanced shutter motor with a brake mechanism for heavy shutters.

Brakeless variants, such as GR170R, match when the oblonium already has other protective systems. In this case, discuss the complete shutter configuration with the installer.

Dual option for very heavy oblones

When the oblonium is over 170 kg, one motor is no longer available. Model Nice Giro GR340E01 Solve the situation with a dual-engined motor. Thus, the lifting force rises to 340 kg. In addition, keep the braking mechanism.

In other words, a double balanced shutter motor avoids changing the entire system to large oblons. However, check whether the axis and the arcs support the new configuration.

Weight of the shutter and choice of a balanced shutter motor

The real weight decides the necessary force. First, find the surface of the shutter, that is, the width multiplied by the height. Then apply the weight per square metre indicated by the manufacturer of the blades. Steel blades weigh more than aluminum. For example, a wide shutter of the steel passes easily by the threshold of 170 kg.

Therefore, it requires the technical sheet of the shutter before ordering. A balanced shutter motor chosen at the limit shall be heated to the same cycles.

Mounting of a balanced shutter motor

The Giro engine is central, on the axis of the shutter. First, the installer checks the axis, the camps and the side guides. Then fix the engine and adjust the race limiters for up and down. Finally, test the stop, brake and manual release.

At the same time, power cables must be protected from moving blades. A properly mounted balanced shutter motor starts linen and stops right at the heads. All the Giro models you find in category of oblones automations.

Unlocking in current

Any motor for balanced shutter must allow access and power out. Model GR170 includes unlocking device, which decouples the ax motor. Then the oblivion rises manually, aided by the bows. At the same time, think where you place the handle, so it's accessible from the inside. They also test the release periodically, not just at the assembly. So, you know for sure it works as needed.

Where an industrial balanced shutter motor is used

Heavy-balanced shutters appear where the gap remains large and traffic constant. Here are some typical examples:

  • Production halls with access to machinery.
  • Logistic warehouses with wide openings.
  • Car showrooms or large commercial spaces.
  • Service workshops with daily opening.

In all these cases, a balanced shutter motor works several times a day. The motor must therefore withstand repeated cycles without overheating.

Balanced shutter engine at work

The robe shutter often moves around people and machines. Therefore, the order must be designed for the safety of the staff. Maintenance buttons, photocells and light signals reduce the risk of accidents. The rules for work equipment in the halls follow them Labour Inspectorate. However, the final configuration is set by the installer after the site analysis.

For control, a 230 V balanced shutter motor requires a compatible power plant. Find variants in control stations. On the other hand, for lighter shutters, garages or shops, see Shutters automations in the Rondo range.

Frequently Asked Questions about Motor for Balanced Shutter

What does "reversible" mean at Nice Giro?

It means that the engine blocks the shutter in the stopping position. Thus, the oblonium does not descend alone and does not rise forcefully.

Can I mount the engine on an existing manual shutter?

Yes, if the oblonium has balancing bows in good condition. The installer first checks the axis and the arches.

When do I choose the double balanced shutter motor option?

When the oblation exceeds 170 kg. Version GR340E01 climbs up to 340 kg.

Is the oblivion going without power?

Yes, to models with unlocking device, like GR170. The bows then help with the manual lifting of the shutter.

A balanced shutter motor suitable for keeping the coat safe and easy to operate. Compare models from Shutters automation, and the ONSEC team helps you choose the right option.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).