Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Automatic gate control board: exchange, universal or dedicated

Automation accessories

Automatic gate control board: exchange, universal or dedicated

Automatic gate control plate represents the brain of any automation: it receives the signal from remote control, starts the engine and reads the photocells. When you fail or change the engine, the choice of the plate decides whether the gate returns to normal operation. Engine compatibility matters the most.

In short: you first look for the original engine exchange unit, then a universal power plant compatible with its voltage and power.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A suitable power plant makes the engine, the cameras and the remote controls work together without forced adjustment. The original replacement unit remains the safest way when the engine works well. The universal power plant helps with old systems or new mountings with special requirements. Check the voltage, power and type of receiver before ordering. Find Nice, BFT, Came and Euromatic models in control stations, with support for choice.

Each gate motor works under the control of an electronic plate. An automatic gate control plate receives the controls, controls the race and stops the movement at the obstacle. However, plates cannot be freely changed between them. In this guide we see what types exist and how you choose correctly.

What makes a control plate automatically open

The plate binds all the components of the installation. First, it receives the radio signal from the receiver and decides to start the engine. Then read the photocells and stop or reverse the motion as needed. It also controls flashing light and automatic shutdown.

  • Adjust the engine force, so also the reaction to the obstacle.
  • Set the time of the break before closing.
  • Manages slowing down the race heads.
  • Memorize the remotes if it's got a built-in receiver.

Signs that an automatic gate control plate is giving way

Not every defect comes from the plate. However, some symptoms often indicate electronics. Before a replacement, check the safety, power and battery of the remote control.

  • The engine no longer reacts, although the plates are lit.
  • Gates stop at half of the race without obstacle.
  • The lamp flashes continuously, with an error code.
  • Memorized remotes disappear after a power outage.
  • The plate shows traces of moisture, oxidation or burnt components.

If traces of water appear, check and seal the box. Otherwise, a new automatic gate control plate can yield as quickly as possible. All the exchange options you find in control stations.

Automatic gearbox control unit

When the original plate is broken, first look for the spare unit of the same manufacturer. For example, Nice NKA3 replaces the Nice NKSL400 engine board, used for sliding gates up to 400 kg. So, too Nice SNA2 Fits garage automations SPIN20KCE, SPIN21KCE and SPIN22KCE.

The advantage is fully compatible with the engine. Thus, you keep the same settings, connectors and accessories. Therefore, an automatic gearbox control plate avoids surprises when operating.

Universal gate control unit

On the other hand, sometimes the original plate is no longer found. In this case, a universal power plant may take over the engine if the voltage and power match. Model BFT RIGEL 6 control one or two 230 V operators up to 650 + 650 W. Plus, he's got a display for programming.

However, a universal power plant requires a careful installer. It checks the type of motor, the racing limiters and the capacitor. In other words, a universal automatic gate control board works well only after a technical check.

Plates for the type of gate

In addition, many plates work only with a certain type of automation. Here are a few examples of the offer:

  • Swing gates: BFT ALCOR AC A, with built-in receiver, dip switches and potentiometers.
  • Sliding gates: Euromatic NUCLEUS 26, 24 V.
  • Doors garage: BFT VEGA BTL2 QUADRO CPEL, for one or two operators.
  • Industrial doors: Nice D-PRO924, for a 24 Vcc encoder motor, SUMO compatible.
  • Bollards: BFT PERSEO CBE 230.P SD, managing up to 4 Bollards.

So, before you buy an automatic gate control plate, note the type of gate and the exact model of the engine. Without this data, you risk an incompatible plate.

Pressure at an automatic control plate

First of all, the plate must correspond to the motor voltage. The 24 V engines use transformer plates and often input plates for batteries. In contrast, 230 V engines work with plates that directly power the motor in the network. Therefore, a 24 V plate cannot control a 230 V motor, and vice versa. Thus, avoid burning the motor or plate at first start.

Also check the maximum power supported. RIGEL 6, for example, indicates the 650 W limit on each output.

Receiver and remote controls on the joint gate control

Some plates have built-in radio receiver, others use connector receiver. For example, Nice D-PRO924 accepts SM connector receivers such as SMXI or OXI. If you want to keep existing remote controls, check their frequency and coding. For separate variants, see radio receivers. Finally, test each remote control after storage, from the usual distance of use.

Programming and diagnosis for an automatic gate control unit

Nice systems with BUS T4 connection allow programming with Nice OVIEW unit. It shall be connected to the power station, on-site or remotely via GPRS. Thus, the installer reads the errors and adjusts the parameters without disassembling the cap. Especially in buildings with many automations, rapid diagnosis saves time.

Safety after plate change

After the assembly of a new plate, the force adjustment becomes mandatory. Too much force makes the claws not stop at contact with an obstacle. Therefore, the installer tests the stop and reverse at each end of the race. At the same time, check the operation of the photocells in Safety photocells.

Requirements for motorized gates appear in the European standards taken up by ASRO. However, the final setting of a control plate makes it the installer, after the type of gate and the mounting place. A well-adjusted automatic gate control plate protects people and cars.

Frequently Asked Questions about Automatic Gate Control Plate

Can I put another manufacturer's plate on my engine?

Sometimes it does, through the universal power station. However, we recommend the original exchange unit first.

What data do I need to order?

You need the brand and model of the engine, voltage and gate type.

Do I keep the old remotes?

Yes, if the new receiver recognizes their frequency and code. Otherwise, replace or add an external receiver.

The new plate regulates the force itself?

Many plates learn the race automatically. But the verification of force remains a task of the installer.

Choose an automatic gate control plate compatible with your engine. See models in control stations, and the ONSEC team helps you identify the right plate.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).