Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Glass access gates: how it works and where it fits

Turnstiles and access control

Glass access gates: how it works and where it fits

A glass access gate controls the passage of people into a building without visually loading the lobby from the entrance. The transparent wings open quickly after validation of the card or code. The width of the passage, the height of the wings and the colour number decide the appropriate configuration for offices, receptions or commercial spaces.

In short: choose the width of the passage, the height of the wings and the color number, then combine the end and middle modules after flow.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The fast doors with glass keep the hall open visually and still control each passage. The configuration starts from the human flow, the color number and the need for a wide passage for wheelchairs or wheelchairs. Integration with the access control system and the evacuation plan shall be discussed in the project phase. See the models Lotgate, Digigon, Came Ozak and Tiso from fast cat swing and ask for support in choosing.

Modern receptions seek strict control without massive barriers. A glass access gate responds exactly to this need. The wings shall only be opened after validation of the access and shall close immediately after passing. Below we explain how the system works and what variants you find in the offer.

How a glass access gate works

The system has one or more passing colors, bounded by lateral modules. In addition, each module contains the engine, sensors and glass wing. After reading the card, the controller sends the opening signal. Then sensors follow the person on the aisle and command the closing after passing.

The wing movement is fast, from here and the name of the fast fighting gate. However, the engine controls the couple, so that the wing does not push a person strongly. For example, Came Ozak PG-03-90 use electronic control of the couple and secure glass wings.

End and middle modules at a glass access gate

First, remember that a multicolored installation uses different modules. The end modules have only one wing, and the middle ones have two. Thus, a middle mode simultaneously serves two joined colors. Therefore, at a three-color glass access gate you need two heads and two middle modules.

Lotgate Range PORTA It follows this logic. Unit Batch PORTA MI works as a central, stainless steel and glass mode. Together with the MASTER and SLAVE units, form 700 mm passageways.

Digigon dTOWER modular system

Digion divides functions into separate modules: receiver, transmitter, receiver-transmitter and terminal. Modules have a two-way door, an armed structure for fixing to the floor and audible signals for permitted or rejected access. Also, the pictograms show the direction of passage.

  • Module Digigon dTOWER R450 has a width of 450 mm.
  • The RT450 option combines the receiver and transmitter in one mode.
  • The terminal closes a color line and reduces the cost of a simple path.

So, a digion glass access gate is built as a set of compatible parts. The installer chooses the modules after the color number.

Glass-winged turnstiles: height and control

The lower wings mark the passage, but they can climb more easily. Instead, the high wings discourage the jump across the gates. Set Tiso SWEEPER HG has 1800 mm high wings for a 550 mm passage. On the other hand, ZKTeco MARS PRO S1000 offers a 650 mm pass for the 1500 mm pass height.

In other words, a high-glass access gate matches areas with strict control. The usual desk receptions often use lower wings.

Passage for persons with disabilities

A standard aisle does not allow a wheelchair to pass. That's why many systems include a wider passage. Unit Lotgate DOOR DISABLED ME serves exactly this purpose in the same PORTA family. At the same time, the wide passage helps to pass carts and luggage.

For other dedicated solutions, see reduced mobility. Accessibility requirements shall be established after the project and the rules in force.

Where a glass access gate fits

The glass also retains an open and elegant appearance. This is why these gates appear especially in indoor spaces:

  • Receptions of office buildings.
  • Educational institutions and libraries.
  • Commercial spaces with controlled access areas.
  • Museums, sports halls or conference centres.

On the other hand, at industrial or external entrances, metal turnstiles can be better resisted. For such areas, see tripod turnstiles.

Control of access to a fast-paced gate

She doesn't decide who's going through. In fact, she's executing the order received from the access controller. Thus, you can use proximity cards, codes or other compatible readers. Digigon modules, for example, integrate easily with access control.

Also think about the flow from the peak hours. Only one corridor gets crowded fast on the way into the turn. Therefore, a glass access gate for a large building needs more color. See all settings in category of fast swing gates.

Assembly and maintenance for glass access gates

The modules shall be fixed in a flat and stable surface. Then the installer pulls the power and data cables through the channels into the floor. At the same time, check the alignment of the wings, so that they can be closed symmetrically in the corridor. Over time, cleaning the bottle and the sensors keeps the operation proper. In other words, maintenance mainly involves cleaning and regular checking of the adjustments.

Evacuation in emergency situations

A fast-paced gate must allow for a free exit to the alarm. Many systems automatically open the wings to the emergency signal or to the loss of power. However, the final solution depends on the design of the building and the requirements of the authorities. Information on evacuation and fire prevention found in IGSU. Therefore, discuss this aspect of the project phase for a glass access gate.

Frequently Asked Questions about Glass Access Gates

What width does a regular aisle have?

Depends on the model. For example, Tiso SWEEPER HG offers 550 mm, and Lotgate PORTA forms the passage of 700 mm.

Does it work both ways?

Yes, many models work bidirectionally, such as the Digigon dTOWER modules.

Can it be mounted outside?

Lotgate Models PORTA of the offer are intended for indoor use. For outdoors, choose dedicated metal solutions.

What identification system does it use?

The gate receives the signal from an access controller, with a card, code or other compatible reader.

A well-chosen glass access gate combines control with a welcoming hallway. Compare models from fast cat swing, and the ONSEC team helps you choose the right configuration.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).