Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Outdoor key selector: types, cylinders and mounting

Automation accessories

Outdoor key selector: types, cylinders and mounting

An external key selector allows the door or garage door to be opened without remote control, with a personal key. You use it as a backup solution, for maintenance personnel or for blocking automation. Carcase resistance and cylinder type make the difference over time.

In short: an external key selector is chosen after mounting (applied or built-in), cylinder (standard or European) and housing.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The key remains the simplest backup command for an automation. Choose the applied option for quick mounting on the pole or the framed option for a discreet look. It prefers the European cylinder if you want easy-to-replace keys and a metal housing where the risk of vandalism increases. Time control and a compatible backup key. Find each selector with external key in the category Key selectors.

The remote is lost, the battery is unloaded, and sometimes you don't even want to give remote controls to everyone. An external key selector solves these simple situations. Mounted next to the gates, he sends the command to the power station only when someone rotates the right key. Below we see the types, materials and assembly details.

How an external key selector works

Inside there is an electrical contact that the cylinder operates. When you rotate the key, the contact closes and the power station gets a boost. Then the key usually returns to the initial position. For example, Motorline SCMV150 act closed/open, returning to heading 0. Thus, the command does not remain active. Practically, an external key selector works as a protected button.

On the other hand, some schemes use the selector for special functions. One example would be to stop automation during maintenance. Therefore, ask the installer which function links to the contact.

Selector with built-in or applied key

The first criterion is the type of assembly. The applied option lies on the surface of the pillar or wall. Instead, the framed version enters the wall and comes out a little bit. Range of Key selectors ONSEC covers both variants.

  • Nice EKS and Nice EKSEU are installed outdoors, applied.
  • Models Nice EKSI and EKSIEU enters the wall, 13 mm away from it.
  • Motorline SCMV150 has anti-vandal metal housing, for outdoor mounting.

Therefore, a selector with external key applied is quickly mounted on any pillar. The framed version, instead, shows more discreetly and leaves less exposed margins.

Standard or European cylinder

The second criterion holds the cylinder. Nice offers both variants, with separate exchange keys. Full Nice CHS is consistent with EKS and EKSI models. For EKSEU and EKSIEU, with the European cylinder, there is the Nice CHEU key. Therefore, if you lose a key, quickly order a compatible reserve. Before ordering, check on the selector what kind of cylinder it has.

The European cylinder has a practical advantage. In general, you change it easier, just like a door cylinder. Motorline SCMV150 also comes with two keys to the European cylinder. An external key selector with a European cylinder thus simplifies key management.

Outdoor key selector: housing and resistance

Outside, the selector faces rain, dust and sometimes vandalism. Nice EKSEU has the part that houses the resistant plastic contacts and a metal protective housing. Motorline goes on with Secured box CSV100, metal and anti-vandal. This measures 130 x 70.5 x 48 mm and comes with a European cylinder and three keys. Attention, however: CSV100 does not contain the internal switch.

At the same time, it matters what it looks like. Fadini CHIS-E 37 focuses on design, and Beninca proposes models K.BY and TOKEY. Each model has a different style, so compare photos before ordering. Thus, you choose an external key selector that matches the gates and the rest of the accessories.

Column Mounting

Sometimes the selector sits on the same column as the photocells. For the PPH2 column, Nice offers the cap EKA01. It allows mounting of EKS and EKSEU models, but also of EDS digital selectors. Therefore, the column becomes a single point of command and safety. It helps especially at gates without building pillars. Thus, an external key selector and photocells share the same support. Columns and photocells found in category Safety photocells.

Who needs an external key selector

  • Owners who want to order a spare at the gate.
  • Security or maintenance firms.
  • The buildings where the remote controls only reach a few people.
  • Installations where the technician needs local locking.

For example, in a sliding cage, the guard uses the key for rare openings outside the program. For office buildings or halls, the rules of access relate to the assessment of workplace risks. General information you find on Labour Inspectorate website. However, an external key selector remains only part of the access control system.

Frequent errors at the selector assembly

  • Mounting too low, where rainwater sprays directly the cylinder.
  • The wire drawn without a wall protection tube.
  • Connecting the selector to an inappropriate input of the power plant.
  • Missing a spare key kept separately.

It therefore plans the position before fixing the carcass. A well-positioned external key selector remains functional years in a row. In addition, it shall maintain the cylinder according to the manufacturer's instructions. Check the watertightness of the cable passage through the housing.

Key or code?

The physical key doesn't need battery and doesn't look. Instead, you can lose it, and someone can copy it. On the other hand, the key doesn't leave a history of access. If you need evidence, talk to the installer about an access control system. For codes, see category Code selector. Some installations combine the two: keyboard for users, key for administrator.

Frequently Asked Questions about Outdoor Key Selector

Can I order a spare key separately?

Yeah. For an external Nice key selector there is the CHS key at EKS and EKSI, respectively the CHEU key at EKSEU and EKSIEU.

What difference does EKSI make to EKS?

EKSI enters the wall, 13 mm above the surface. EKS is mounted on the outside.

Does the key selector work without power?

The selector just sends a contact. Without power supply, the engine doesn't start. For power feathers, talk to the installer about backup batteries.

Where do I mount the selector?

Near the gates, at comfortable heights, usually on the pillar or on the column. Ideal, an external key selector remains accessible only from the desired area. Avoid areas where the water bathes.

Choose from category Key selectors an external key selector suitable for mounting and serving. The ONSEC team helps you find the compatible cylinder and spare keys.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).