
Remote clone control for gates: how to copy the code without mistakes
A remote clone gate control copies the signal of an existing remote control and reproduces it on one of its buttons. Thus, you quickly replace a lost remote control or tighten multiple gates on one device. However, success depends on frequency and code type.
In short: check the frequency and code type of the original, choose a compatible model, then copy each button separately and test it immediately.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
Before you buy a remote clone control for the gate, find out the frequency and type of code of the original. For fixed code, almost every clone in the same band works. For rolling code, choose a model that explicitly declares this compatibility or takes into account an external receiver. Then copy each button separately and test immediately. So, you have a secure reserve for the gates, garage and barriers. View models in category remote controls clone duplicates.
A remote clone control for the gate learns the signal of an original remote control and reproduces it identically. The procedure usually takes a few minutes and does not require access to the automation plate. Therefore, the solution helps especially when you have lost a remote control or want a quick backup.
However, not every signal is copied as easily. Below we explain why, based on the real models in the category remote controls clone duplicates.
How to Copy a Remote Clone Control for Gates
First, you put the two remotes in control side by side. Then activate the learning mode on the clone and press the desired button on the original. In the end, the clone confirms, usually through an LED, that it memorized the code. In other words, a remote clone gate control works as a receiver and a transmitter in the same housing.
Each button is also copied separately. For example, AJ-D-SI can duplicate buttons from different remote controls on the four keys. Thus, a single device opens gates, garage door and parking barrier.
Fixed code or rolling code: the decisive difference
The fixed code always transmits the same sequence. Therefore, any remote clone gate control compatible with frequency copies it without problems. Instead, the rolling code, also called rolling code, changes at each push. So, simple copying of the wave doesn't get enough.
However, some models solve this limit. For example, Clodup CD02 states that it can copy remote controls with fixed code and rolling code from over 300 models. Also, Sice Tech Why EVO works with both fixed code and rolling code. However, the clone should also be recorded in the automation receiver in certain running systems.
Suitable frequency for remote clone control for gate
A remote clone gate control only copies the signals in the tape it receives. Therefore, it compares the frequency of the original with the specifications of the clone. Here are the beaches in the category:
- For example, AJ-D-SI works on 433,92 MHz, only with a fixed code.
- Then Daspi TX Installer uses 433 MHz and four channels.
- Instead, Creasol MultiST covers the range 286–868 MHz.
- On band 433,92–868,35 MHz you find Sice Tech Why EVO Black - Green.
- Clodup CD02 indicates, in turn, the band 433–868 MHz.
The frequency usually appears on the back label or on the inside plate. If you don't find it, look for the original model in the manual. Thus, choose a remote clone control for the gate that even recognizes the signal.
Universal Clone and Marked Clones
Some clones accept a wide range of brands. For example, MultiST Creasol has LED bicolor and copy most remote controls for garage doors, barriers and gates. Instead, Clodup CD02 appears in versions for a particular brand, such as CD02 for Came, Nice, Stagnoli, or aprimatic.
Thus, the dedicated version reduces the risk of incompatibility with your system. On the other hand, the universal version offers freedom if you have gates from different producers. Therefore, the choice holds the number of marks that you want to gather on a single remote clone control for the gate.
Practical steps for successful copying
- First, replace the original battery if the signal looks weak.
- Then keep the remotes a few inches apart.
- It also avoids areas with other radio active sources nearby.
- Test each button right after the memo.
- Finally, write down a label that opens each key.
If the clone does not react, check the frequency again. Then try the reset procedure in the clone manual. In addition, some models, such as Sice Tech Why EVO Black - Green, simple self-memorial procedures.
Situations in which you choose a remote clone control for the gate
Owners usually ask for a clone in some typical situations. For example, a family needs an extra remote control for a child who has taken the permit. Then a block manager wants reservations for joint gates. At the same time, a driver with three different gates prefers a single device in the car. So, a remote clone control for gate quickly solves practical daily needs.
Cloning care over time
A clone usually sits in the car or pocket, so it endures heat, cold and shock. That's why keep her away from the hot summer board. In addition, change the battery to the first signs of low radius. Then check periodically if all four buttons answer. Thus, a remote clone control remains reliable years in a row. At the same time, if you change automation, copy the new codes again on the same keys.
When the clone doesn't solve the problem
Sometimes the automation receiver only accepts registered original remote controls. In this case, an original new remote control or an external receiver solves the problem more elegantly. For example, universal receivers allow the addition of new remote controls directly into memory. See the options in the category radio receivers. For original models, compare and Remote controls for automation.
It also uses the clone only for the systems you administer. The rules on radio equipment and access to property are found on National legislative portal.
Frequently Asked Questions: Remote Clone Control for Gates
Can I copy a remote control with rolling code?
Depends on the clone and the system. Models like Clodup CD02 declare compatibility with rolling code, but some receivers require separate recording.
How many codes do you store a remote clone control for the gate?
Category models have four buttons. Thus, you memorize up to four different codes.
Does the Clone consume more battery?
Not usually, because it only emits at the press. However, it replaces the battery when the radiation drops visible.
What do I do if I don't know the frequency?
Look for the label or manual of the original. Alternatively, choose a broadband clone, like Creasol MultiST.
Compare models in category remote controls clone duplicates. The ONSEC team helps you choose a remote clone gate control compatible with your original.



















