Technical advice: 021 450 60 70 · Delivery nationwide · Blog

ONSEC
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Automatic sliding door for entry: empty, sheets and weight

Door and industrial automation

Automatic sliding door for entry: empty, sheets and weight

An automatic sliding door for entry opens the building without touching and keeps the heat inside. For a correct choice, the width of the void, the number of sheets, the weight of each sheet, and the type of frame are important. All this data appear directly in the product name.

In short: the goal of up to 1400 mm goes with a movable sheet, the largest one with two sheets; then check the weight on the sheet and the profile of the frame.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

An automatic sliding door for the right entrance starts from the real gap in the building. Choose a moving sheet for narrow gaps and two sheets for wide entries, check the allowed weight on the sheet and the profile of the frame, then think about sensors and behavior at the current. For escape routes, ask the designer's advice. See models Dormakaba ES200 Easy and G-U GS-100 in category of sliding door automations.

An automatic sliding door for entry changes the way people enter a store, office or clinic. The sheets retract sideways, so they don't occupy space in front of the door. In addition, unaffected opening helps the flow of people with luggage or carts. However, the choice requires some clear measurements.

What figures in an automatic sliding door mean for entry

The names in the ONSEC range have a constant pattern. First, the gap, i.e. the width and height of the opening, e.g. 1000 x 2200 mm. Then follow the mobile number. Finally, see the maximum weight on the sheet and the profile of the frame. So, you're reading from a glance if an automatic sliding door for entry matches your void.

  • Empty: width x height, in millimetres.
  • Mobile: one or two.
  • Weights on sheets: limit of mechanism.
  • Branch: the profile that holds the bottle.

Automatic sliding door with one sheet or two sheets

For narrow gaps, an automatic sliding door for entry with a single sheet remains the simple option. For example, Dormakaba ES200 Easy for goal 1000 x 2200 mm It has a movable sheet of up to 120 kg. The ES200 Easy range even starts from an 800 mm goal. Instead, from 1600 mm up, Dormakaba passes to two 85 kg sheets.

Two sheets open symmetrically, so each one only travels half the distance. Therefore, the passage is released faster. At the same time, you need space for withdrawal on both sides. An automatic sliding door for entry with a single sheet requires, instead, free wall only on one side.

Dormakaba ES200 Easy and G-U GS-100

The range on ONSEC covers two main families. Both offer an automatic sliding door for entry with fine frame and discreet appearance. Dormakaba ES200 Easy comes with ST FLEX fine frame, for goals from 800 to 2800 mm. G-U GS-100 doors fine G30 frames and takes 100 kg per sheet, for goals from 1000 to 2600 mm. For example, G-U GS-100 for empty 1400 x 2200 mm It's got a piece of furniture. On the other hand, G-U GS-100 for empty 2200 x 2200 mm work with two sheets.

All models in these series have a gap height of 2200 mm. In other words, you choose primarily after width. If your entry has another height, discuss the option with a specialist before ordering.

How to measure the void for an automatic sliding door for entry

Measure the free width between the finite faces of the wall. Then measure the height from the finished floor to the buiandrug. Also check if the side wall is in place for the retracted sheet. The mechanism is above the void, so you need space for his housing.

  • The width of the void is finished, at several heights.
  • Free height up to under buiandrug.
  • Lateral space for foil removal.
  • The area above the mechanism.

If the measurements fall between two variants, choose the immediately higher void and adjust from the carpenter. Thus, an automatic sliding door for entry is mounted without cuttings in the wall.

Weight of sheet and type of glass

The thick bottle or the gutter weighs a lot. That's why the 120 kg, 100 kg or 85 kg per sheet matters. Calculate the weight after the surface of the foil and the thickness of the bottle. Then compare the result with the limit that an automatic sliding door allows for entry into the range. For example, Dormakaba ES200 Easy for goal 2400 x 2200 mm It admits 85 kg on each sheet.

Automatic sliding door and escape routes

The main entrance often serves for evacuation. Therefore, the behaviour of the door to the power outage or fire alarm matters a lot. The exact requirements relate to the building project, the fire safety scenario and the authorities' opinions. For general information on fire prevention, consult IGSU. However, the final solution for an automatic sliding door for entry shall be established by the designator.

In addition, the presence sensors stop the sheets when someone stands on the threshold. Their proper rule protects children and elderly people.

Thermal comfort and flow of people

The sliding doors only open as needed and close immediately after the passage. So the warm air stays inside the winter. Besides, the sheets don't blow, like it happens at the doors with the hinges. For a store, that means a free and clean entrance. Also, an automatic sliding entry door removes the handle, so customers don't touch anything. ST FLEX or G30 thin branches let more light through the glass. All models compare them in category of sliding door automations.

Where each variant fits

A small office or a low-traffic office works well with a 1000 mm sheet. A large-flowing store gains from a two-sheet door and a 2000 mm or more gap. For halls and warehouses, look at automations for industrial sliding doors. And for a door with hinges, see automations for doors.

Frequently asked questions about an automatic sliding door for entry

What minimum goal does the range cover?

Dormakaba ES200 Easy starts from an 800 x 2200 mm goal, with a movable sheet.

When do I choose two mobile sheets?

When the void passes by about 1400 mm. Thus, each sheet runs a smaller distance.

Can I mount an automatic sliding door for entry on an existing void?

Yes, if there is side space for the sheets and place above the mechanism. Otherwise, you adjust the void.

What am I doing out of power?

Check the spare power and manual opening options. Then set the option with the projector.

Conclusion

In conclusion, an automatic sliding door for entry is chosen after empty, number of sheets and bottle weight. Compare Dormakaba and G-U models in category of sliding door automations. The ONSEC team helps you choose if you send them the size of the void.

Recommended products

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).